View CLAA170EA07_4507473.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

cpt chunghwa pictures tubes, ltd., cpt confidential /22 CLAA170EA07q_y-yih hsing-ver:1-20060314 0 x c c h h u u n n g g h h w w a a p p i i c c t t u u r r e e t t u u b b e e s s , , l l t t d d . . t t e e c c h h n n i i c c a a l l s s p p e e c c i i f f i i c c a a t t i i o o n n to : studio technology co.,ltd date : 2006/03/14 accepted by approved by checked by prepared by product planning management general division chunghwa pictuer tubes, ltd. 1127 hopin rd., padeh, taoyuan, taiwan 334, r.o.c. tel: +886-3-3675151 fax: +886-3-377-3001 doc.no: CLAA170EA07q_y-studio-ver:1 issue date: 2006/03/14 cpt tft-lcd CLAA170EA07q y www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., cpt confidential 1 /22 CLAA170EA07q_y- studio -ver:1-20060314 1.overview CLAA170EA07 is 17.0? color tft-lcd (thin film transistor liquid crystal display) module composed of lcd panel, driver ics, control ci rcuit and backlight.by applying 8 bit digital data, 1280 1024, 16.2m-color images are displayed on the 17.0? diagonal screen. input power voltage is 5.0v for lcd driving.inverter for backlight is not incl uded in this module. general specification are summarized in the f ollowing table: item specification display area(mm) 337.920(h)x270.336(v) (17.0-inch diagonal) number of pixels 1280(h)x1024(v) pixel pitch(mm) 0.264(h)x0.264(v) color pixel arrangement rgb vertical stripe display mode normally white, tn number of colors 16.2m(6 bit+frc) brightness(cd/m^2) 300 cd/m 2 (typ.)(center point, lamp current=7.5 ma) viewing angle 140/130(typ.) surface treatment anti-glare electrical interface lvds , 2ch total module power(w) 22.3 (typ.) optimum viewing angle 6 o?clock module size(mm) 358.5(w)x296.5(h)x17.5(d) module weight(g) 2000(typ) backlight unit ccfl, 4 tables, edge-light(top*2/bottom*2) www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., cpt confidential 2 /22 CLAA170EA07q_y- studio -ver:1-20060314 2. absolute maximum ratings item symbol min. max. unit remark power supply voltage for lcd vcc 0 6.5 v -- lamp voltage vl 625 832 vrms lamp current il 3 7.5 marms note4,7 lamp frequency fl 40 80 khz vesd t -200 200 v static electricity vesd c -8000 8000 v note 5 operation temperature t op 0 50 note1,2,3,6 storage temperature t stg -20 60 note1,2,3 delayed discharge time td -- 1 sec note 8 [note 1]the relative temperature and humidity range are as below sketch, 90%rhmax.(ta Q40) . [note 2]the maximum wet bulb temperature Q39(ta 40) and without dewing. [note 3]if you use the product in a environment which over the definition of temperature and humidity too long to effect the result of eye-atching. [note 4]the life time of the lamp is relate to the current of the lamp, so please accronding to the description of the ?(b) backlight? on page 6. [note 5]test condition: iec 1000-4-2 , vesdt contact discharge to input connectorvesd c contact discharge to module [note 6]if you operate the product in normal temperat ure range, the center surface of panel should be under 60 . [note 7]when lam p current is out of the absolute maximum range the life will fall rapidly or shown unusual sign . il min 2ma only for test only, but we can?t guarantee the lifetime and performance [note 8]delay lighting testing need s the volt above start volagte vrms .before the procedure tube needs typical lighting for 1 mi nute and stay in the temperature 25 2 for 24 hours and then testing in the same condition in dark room . 0 20 40 60 - 20 20 40 60 80 5 90 50 operatin g ran g e stora g e ran g e temperature(c) ( 50,50.4 ) ( 60,27.7 ) ( 40,90 ) www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., cpt confidential 3 /22 CLAA170EA07q_y- studio -ver:1-20060314 3. electrical characteristics (a)tft-lcd ta=25 item symbol min typ max unit remark power supply voltage for lcd vcc 4.5 5.0 5.5 v note1 power supply current for lcd icc - 700 950 ma note2 permissive input ripple voltage vrp - - 100 mvp-p vcc=5.0v differential impedance zm 90 100 110 ? common mode voltag vcm 1.125 1.25 1.375 v differential input voltage |vid| 250 350 450 mv threshold voltage(high) vth - - 100 mv logic input voltage lvds:in+ in- threshold vol t age(low) vtl -100 - - mv note3 i rush current irush 3 a note 4 power consumption p 3.5 4.75 w note2 [note 1] vcc-turn-on conditions: t1 Q 10ms 1 sec Qt4 0 t2 Q 20ms 200ms Q t5 0t3 Q 50ms 200ms Q t6 0t4 Q 10ms data t1 t2 t3 4.5v 4.5v 0.5v vin=5.0v 0.5v 0.5v t4 t5 lcd power supply logic signal t6 t7 backlight power supply vl data: rgb data, dclk, dena vcc-dip conditions 1) when 3.6v Q vcc(min)<4.5v: td Q 10 m s 2) when vcc <3.6 v 3.6 4.5v vcc-dip conditions should also follow the vcc-turn-on conditions. www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., cpt confidential 4 /22 CLAA170EA07q_y- studio -ver:1-20060314 [note 2] typical current situation : 64 gray scale level,1280 line mode, vcc=5.0v, fh=64khz,fv=60hz, fclk=54 mhz . [note 3] lvds signal definition : vid = vin + C vin- , vin + = positive differential data & clk input vin- = negative differential data & clk input vcm = vcm + Cvcm- , vid = vid + Cvid- , vid+ =vih + Cvih- , vid- = vil + Cvil- , vcm =(vin + +vin-)/2, vcm+ =(vih + +vih-)/2, vcm- =(vil + +vil-)/2, [note4 ] irush measurement condition (b)backlight www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., cpt confidential 5 /22 CLAA170EA07q_y- studio -ver:1-20060314 1.electrical specification ta=25 item symbol min typ max unit remark lamp voltage vl 606 673.3 740.6 vrms il=7.0ma note 1 lamp current il 6.5 7 7.5 marms note1 interter frequency fl 45 50 65 khz note2 -- -- 1710 vrms tb=0 starting lamp voltage vs -- -- 1490 vrms ta=25 2. life time il at 3.0 ma il at 7.0 ma il at 7.5 ma unit remark lamp life time min. 40,000 min. 40,000 min. 30,000 hr continuous operation, note 3 rated time (turn on/off) -- min.100,000 -- time note 4 [note ] measuring inverter type m063-4 if the waveform of light up-driving is asymm etr ic, the distribution of mercury inside the lamp tube will becom e unequally or will deplete the ar gas in it. then it may cause the abnormal phenomenon of lighting-up. therefore, designers have to try their best to forfill the conditions under the inverter designing-stage as below: ?the degrees of unbalance 10% ? the ratio of wave height 2 10% [note 1] lamp current measurement method ( the current meter is inserted in cold line) [note 2] lcd module inverter power- supply a ctl cth a ctl cth a ctl cth a ctl cth ip i-p iphigh side peak i-plow side peak athe degrees of unbalance =ip ? i-p/ irms 100 (%) bthe ratio of wave height = ip (or i-p) / irms www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., cpt confidential 6 /22 CLAA170EA07q_y- studio -ver:1-20060314 1.frequency in this range can mala the characterisitics of electric and optics maintain in +/- 10% except hue. 2.if the lamp frequency can be maintain in 50~60khz, the better charactristics of the electrical and the optical can be presented. 3.if the operating frequency is 40~80 khz, the life time and the reliability of the lamp will not be affect. 4.lamp frequency of inverter may produce interference with horizontal synchronous frequency,and this may cause horizontal beat on the display.therefore, please adjust lamp frequency, and keep inverter as far from m odule as possible or use electronic shielding between inverter and module to avoid the interference. [note 3] definition of the lamp life time luminance (l) under 50% of specification starting lam p voltage or starting lamp voltage is more than 130% of the initial value [note 4] the condition of turn-on and turn-off operation is as below: a. lamp current is 7.0ma b. frequency is 10 sec.(on)/10 sec.(off) c. repeat it for 10 thousand times d. the result of eye-atching of the lamp hue is normal, and can switch the lam p. it should not have motion fail when starting lamp voltage is lower than 130% of the initial value [note 5] it is necessary to consider the maximal value when design inverter in order to asure lighting . [note 6] wl =il x vl x 4 (il=7ma ta=25 ) www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., cpt confidential 7 /22 CLAA170EA07q_y- studio -ver:1-20060314 4. interface pin connection (a) cn1(data signal and power supply) used connector: fi-xb30ssl-hf15(jae) or equivalent pin no. symbol function 1 rxo0- minus signal of odd channel 0(lvds) 2 rxo0+ plus signal of odd channel 0(lvds) 3 rxo1- minus signal of odd channel 1(lvds) 4 rxo1+ plus signal of odd channel 1(lvds) 5 rxo2- minus signal of odd channel 2(lvds) 6 rxo2+ plus signal of odd channel 2(lvds) 7 gnd ground 8 rxoc- minus signal of odd clock channel (lvds) 9 rxoc+ plus signal of odd clock channel (lvds) 10 rxo3- minus signal of odd channel 3(lvds) 11 rxo3+ plus signal of odd channel 3(lvds) 12 rxe0- minus signal of even channel 0(lvds) 13 rxe0+ plus signal of even channel 0(lvds) 14 gnd ground 15 rxe1- minus signal of even channel 1(lvds) 16 rxe1+ plus signal of even channel 1(lvds) 17 gnd ground 18 rxe2- minus signal of even channel 2(lvds) 19 rxe2+ plus signal of even channel 2(lvds) 20 rxec- minus signal of even clock channel (lvds) 21 rxec+ plus signal of even clock channel (lvds) 22 rxe3- minus signal of even channel 3(lvds) 23 rxe3+ plus signal of even channel 3(lvds) 24 gnd ground 25 nc nc or ground 26 nc test pin 27 nc nc or ground 28 vcc power supply input voltage(5.0 v) 29 vcc power supply input voltage(5.0 v) 30 vcc power supply input voltage(5.0 v) (b) cn2,3,4,5(backlight) backlight-side connector: bhr-02vs-1(jst) inverter-side connector: sm02(4.0)b-bhs-1-tb(jst) pin no. symbol function 1 cth p ower for ccfl 2 ctl p ower return for ccfl www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., cpt confidential 8 /22 CLAA170EA07q_y- studio -ver:1-20060314 5. interface timing (a) timing specifications item symbol min typ max unit frequency f clk 45 54 70 mhz dclk period t clk 14.3 18.5 22.2 ns horizontal active time tha 640 640 640 tclk horizontal blank time thb 70 204 - tclk horizontal total time th 710 844 - tclk vertical active time tva 1024 1024 1024 th vertical blank time tvb 22 42 - th vertical total time tv 1046 1066 - th lcd timing data enable dena vertical frame rate fr 50 60 75 hz [note] 1) dena should always be positive polarity as shown in the timing specification. 2) clk inshould appear during all blanking period, 3) using lvds ic receiver transmitter ds90c384mtd(ns) ds90c383mtd(ns) sn75lvds82(ti) sn75lvds83(ti) 5 ) required signal assignment for flat link transmitter pin pin name re q uire si g nal pin pin name re q uire si g nal 1 vcc power su pp l y for ttl in p u t 29 gnd ground p in for ttl 2 d5 ttl in p ut ( r7 ) 30 d26 ttl inp ut ( de ) 3 d6 ttl in p ut ( r5 ) 31 txclkin ttl level clock in p u t 4 d7 ttl in p ut ( g0 ) 32 pwr dwn power down in p u t 5 gnd ground p in for ttl 33 pll gnd ground p in for pll 6 d8 ttl in p ut ( g1 ) 34 pll vcc power su pp l y for pll 7 d9 ttl in p ut ( g2 ) 35 pll gnd ground p in for pll 8 d10 ttl in p ut ( g6 ) 36 lvds gnd ground p in for lvds 9 vcc power su pp l y for ttl in p u t 37 txout3+ positive lvds differential data out p ut 10 d11 ttl in p ut ( g7 ) 38 txout3- n e g ative lvds differential data out p ut 11 d12 ttl in p ut ( g3 ) 39 txclkout+ positive lvds differential clock 12 d13 ttl in p ut ( g4 ) 40 txclkout- n e g ative lvds differential clock 13 gnd ground p in for ttl 41 txout2+ positive ldvs differential data out p ut 14 d14 ttl in p ut ( g5 ) 42 txout2- n e g ative lvds differential data out p ut 15 d15 ttl in p ut ( b0 ) 43 lvds gnd ground p in for lvds 16 d16 ttl in p ut ( b6 ) 44 lvds vcc power su pp l y for lvds 17 vcc power su pp l y for ttl in p u t 45 txout1+ positive lvds differential data out p ut 18 d17 ttl in p ut ( b7 ) 46 txout1- n e g ative lvds differential data out p ut 19 d18 ttl in p ut ( b1 ) 47 txout0+ positive lvds differential data out p ut 20 d19 ttl in p ut ( b2 ) 48 txout0- n e g ative lvds differential data out p ut 21 gnd ground p in for ttl 49 lvds gnd ground p in for ttl 22 d20 ttl in p ut ( b3 ) 50 d27 ttl inp ut ( r6 ) 23 d21 ttl in p ut ( b4 ) 51 d0 ttl inp ut ( r0 ) 24 d22 ttl in p ut ( b5 ) 52 d1 ttl inp ut ( r1 ) 25 d23 ttl in p ut ( lvds ) 53 gnd ground p in for ttl 26 vcc power su pp l y for ttl in p u t 54 d2 ttl inp ut ( r2 ) 27 d24 ttl in p ut ( hsync ) 55 d3 ttl inp ut ( r3 ) 28 d25 ttl in p ut ( vsync ) 56 d4 ttl inp ut ( r4 ) www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., cpt confidential 9 /22 CLAA170EA07q_y- studio -ver:1-20060314 (b) timing chart even ( r,g,b 2 4 1278 1280 6 invalid data invalid data a. horizontal timing chart dcl first data 3 5 odd (r,g,b 1 1277 1279 invalid data invalid data last data t h a t hb den b. vertical timing chart t vb den t v a invalid data line 1 2 1023 1024 3 invalid data www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., cpt confidential 10 /22 CLAA170EA07q_y- studio -ver:1-20060314 (c) lvds data a. timing chart rc0 rc6 rc5 rc4 rc1 rc1 rc2 rc3 rc0 ra1 ra0 ra4 ra5 ra6 ra2 ra3 ra1 ra0 rb1 rb0 rb6 rb5 rb3 rb4 rb2 rb1 rb0 rclk ra rb rc 1c lk d a t a fo r c u rre n t c l k c y c l e next rd rd0 rd6 rd5 rd4 rd1 rd1 rd2 rd3 rd0 b data mapping (6bit + frc or 6bit selection) cell input pin *) data(6bit + frc) data(6bit) ra0 ra1 ra2 ra3 ra4 ra5 ra6 rb0 rb1 rb2 rb3 rb4 rb5 rb6 rc0 rc1 rc2 rc3 rc4 rc5 rc6 rd0 rd1 rd2 rd3 rd4 rd5 rd6 ref-rclk txln0 txln1 txln2 txln3 txln4 txln6 txln7 txln8 txln9 txln12 txln13 txln14 txln15 txln18 txln19 txln20 txln21 txln22 txln24 txln25 txln26 txln27 txln5 txln10 txln11 txln16 txln17 txln23 txclkin ri0 ri1 ri2 ri3 ri4 ri5 gi0 gi1 gi2 gi3 gi4 gi5 bi0 bi1 bi2 bi3 bi4 bi5 rsvd rsvd dena ri6 ri7 gi6 gi7 bi6 bi7 (rsvd) dclki 0 0 ri0 ri1 ri2 ri3 0 0 gi0 gi1 gi2 gi3 0 0 bi0 bi1 bi2 bi3 rsvd rsvd dena ri4 ri5 gi4 gi5 bi4 bi5 (rsvd) dclki *) ds90c383mtd www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., cpt confidential 11 /22 CLAA170EA07q_y- studio -ver:1-20060314 (d)color data assignment r data g data b data r7 r6 r5 r4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g0 b7 b6 b5 b4 b3 b2 b1 b0 color input data msb lsb msb lsb msb lsb black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 basic color white 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 red(0) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red(1) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red(2) 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red(254) 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(0) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 green(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 green(254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 green green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 blue(0) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue(1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 blue(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 blue(254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 blue blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 [note] (1)definition of gray scale: color(n) : n indicates gray scale level. higher n means brighter level. (2) data:1-high,0-low. (3) this assignment is applied to both odd and even data. (e) color data assignment d(1,1) d(2,1) -- d(x,1) -- d(1279,1) d(1280,1) d(1,2) d(2,2) -- d(x,2) -- d(1279,2) d(1280,2) | | + .. + | | d(1,y) d(2,y) -- d(x,y) -- d(1279,y) d(1280,y) | | + .. + | | d(1,1023) d(2, 1023) -- d(x, 1023) -- d(1279,1023) d(1280,1023) d(1,1024) d(2, 1024) -- d(x, 1024) -- d(1279,1024) d(1280,1024) www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., cpt confidential 12 /22 CLAA170EA07q_y- studio -ver:1-20060314 6. block diagram lvds receiver 2ch timing controller lamp unit in backlight source driver lcd panel 1280 x 3 x 1024 gate driver power supply circuit cn2 tft-lcd module lamp uint in backlight ccfl 1 2 cn2,4 cn1 i/f connector cn3 cn4 cn5 lamp unit in backlight 1 2 cn3,5 ccfl www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., cpt confidential 13 /22 CLAA170EA07q_y- studio -ver:1-20060314 7. mechanical specification (a) front side (tolerance is 0.5mm unless noted) (warehouse code:xx2) unit: mm www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., cpt confidential 14 /22 CLAA170EA07q_y- studio -ver:1-20060314 (b) rear side (tolerance is 0.5mm unless noted) (warehouse code:xx2) unit: mm suggestion: don? release the lamp wire from side hook for protect lamp solder www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., cpt confidential 15 /22 CLAA170EA07q_y- studio -ver:1-20060314 (c) front side (tolerance is 0.5mm unless noted) (warehouse code:xx0) unit: mm www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., cpt confidential 16 /22 CLAA170EA07q_y- studio -ver:1-20060314 (d) rear side (tolerance is 0.5mm unless noted) (warehouse code:xx0) unit: mm suggestion: don? release the lamp wire from side hook for protect lamp solder www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., cpt confidential 17 /22 CLAA170EA07q_ studio -ver:1-20060314 8.optical characteristics ta=25 vcc=5.0v item symbol condition min. typ. max. unit contrast ratio cr = ? 0 450 500 -- -- center l = ? 0 230 290 -- cd/m 2 luminance uniformity l = ? 0 75% -- -- tr = ? 0 -- 3 6 ms response time tf = ? 0 -- 5 10 ms horizontal (l/r) 80/80 -85/85 -- vertical (d/u) crR5 80/80 -85/85 -- horizontal (l/r) 65/65 -70/70 -- viewing angle vertical (d/u) crR10 60/60 -67/63 -- white wx wy 0.283 0.299 0.313 0.329 0.343 0.359 red rx ry 0.614 0.308 0.644 0.338 0.674 0.368 green gx gy 0.240 0.572 0.270 0.602 0.300 0.632 color coordinates blue bx by = ? 0 0.110 0.054 0.140 0.084 0.170 0.114 -- image sticking tis 2 hour 2 sec crosstalk ct 1.5% gamut cs 70% 72% gamma y gl(32-223) 2.0 2.3 2.6 maximun dark luminance - 0.6 0.7 cd/m 2 color temperature tc - 6500 - k all optical specification condition: (1) equipment: cs-1000 (minoluta) or bm-5a( topcon) under the dark room condition( no ambient light) after mo re than 30 minutes turning on the lamp (2) condition: il=7.0( each lamp)ma, inverter: multipal ( m063-4), frequency=50khz. [note 1] defination of contrast ratio cr=on(w hite)luminance/off(black)luminance [note 2] defination of lum inance and luminance uniformity l=[l(min)/l(max)] ? 100 % w 9 2 3 1 1/10 h 1/10 w 640 (1280,1024) (1,1) 4 5 6 7 8 512 h www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., cpt confidential 18 /22 CLAA170EA07q_y- studio -ver:1-20060314 [note 3] definition of viewing angle( , ) u pp e r ri g h t lower lef t [note 4] definition of response time luminance white black 90 % 90 % 10 % 10 % tf tr [ note 5] definition of image sticking: from continuous display pattern(white ?r? with blue background) 2hours change to 128 gray level pattern .the previous image shall not persist more then 2 second at 25 c. rrrrrrrrrrrrrrr rrrrrrrrrrrrrrr rrrrrrrrrrrrrrr rrrrrrrrrrrrrrr rrrrrrrrrrrrrrr rrrrrrrrrrrrrrr www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., cpt confidential 19 /22 CLAA170EA07q_y- studio -ver:1-20060314 [ note 6] defination of crosstalk = max(( | (lb1-la)/lc | ) 100), ( | (lb2-la)/lc | ) 100) la brightness of m easured location at pattern a lb1 lb2 brightness of measured location at pattern b1 b2 lc brightness of measured location at pattern c black (256, 192) (768,576) half-tone half-tone white (896,384) white half-tone (512,672) pattern b1 pattern a pattern c pattern b2 [note7] defination of gamma ( ) , gray level 32~223 gl 32 t % y=ax 223 www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., cpt confidential 20 /22 CLAA170EA07q_y- studio -ver:1-20060314 9.reliability test conditions (1) temperature and humidity test items conditions high temperature high humidity operation 50 ; 90%rh; 240h (no condensation) high temperature high humidity storage 60 ; 90%rh;48h (no condensation) high temperature operation 50 ; 240h high temperature storage 60 ; 240h low temperature operation 0 ; 240h low temperature storage -20 ; 240h thermal shock between -20 (1hr)and 60 (1hr); 100 c ycles (2)shock & vibration items conditions shock (non-operation) shock level:1470m/s^2(150g) waveform: half sinusoidal wave, 2ms number of shocks: one shock input in each direction of three m utually perpendi cul ar axes for a total of six shock inputs vibration (non-operation) vibration level: 9.8m/s^2(1.0g) zero to peak waveform: sinusoidal frequency range: 5 to 500 hz frequency sweep rate: 0.5 octave/min duration: one sweep from 5 to 500h z in each of three m utually perpendicular axis(each x,y, z axis: 1 hour, total 3 hours) (3) esd position condition( mdl turn off) connector 1. 200 pf 0 ? 250 v 2. contact m ode for each pin moudle 1. 150 pf 330 ? 15k v 2. air mode, test 25 tim es for each test point 3. contact m ode, 25 times for each test point (4) judgment standard the judgment of the above test should be made as follow: pass: normal display image with no obvious non-uniformity and no line defect. partial transformation of the module parts should be ignored. fail: no display im age, obvious non-uniformity, or line defects. www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., cpt confidential 21 /22 CLAA170EA07q_y- studio -ver:1-20060314 10. handling precautions for tft-lcd module please pay attention to the followings in handling- tft-lcd products; 1 assembly precaution (1) please use the mounting hole on the module side in installing and do not beading or wrenching lcd in assembling. and please do not drop, bend or twist lcd module in handling. (2) please design display housing in accordance with the following guide lines. (2.1) housing case mu st be destined carefully so as not to put stresses on lcd all sides and not to wrench module. the stresses may cause non-uniform ity even if there is no non- uniformity statically. (2.2) keep sufficient clearance between lcd module back surface and housing when the lcd module is mounted. approximately 1.0 m m of the clearance in the design is recommended taking into account the tolerance of lcd module thickness and mounting structure height on the housing. (2.3) when some parts, such as, fpc cable a nd ferrite plate, are installed underneath the lcd module, still sufficient clearance is required, such as 0.5mm. this clearance is, especially, to be reconsidered when the additional parts are implemented for emi countermeasure. (2.4) design the inverter location and connector position carefully so as not to give stress to lamp cable, or not to interface the lcd module by the lam p cable. (2.5) keep sufficient clearance between lcd module and the others parts, such as inverter and speaker so as not to interface the lcd modul e. approximately 1.0mm of the clearance in the design is recommended. (3) please do not push or scratch lcd panel surf ace with any-thing hard. and do not soil lcd panel surface by touching with bare hands. ( pola rizer film, surface of lcd panel is easy to be flawed.) (4) please do not press any parts on the rear side such as source tcp, gate tcp, control circuit board and fpcs during handling lcd module. if pressing rear part is unavoidable, handle the lcd module with care not to dama ge them. (5) please wipe out lcd panel surface with absorb ent cotton or soft cloth in case of it being soiled. (6) please wipe out drops of adhesives like saliva and water on lcd panel surface immediately. they might damage to cause panel surface variation and color change. (7) please do not take a lcd m odule to pieces and reconstruct it. resolving and reconstructing modules may cause them not to work well. (8) please do not touch metal frames with bare ha nds and soiled gloves. a color change of the metal frames can happen during a long preservation of soiled lcd m odules. (9) please pay attention to handling lead wire of backlight so that it is not tugged in connecting wit inverter. 2 operating precautions (1) please be sure to turn off the power suppl y before connecting and disconnecting signal input cable. (2) please do not change variable resistance settings in lcd module. they are adjusted to the most suitable value. if they are changed, it mi ght happen lcd does not satisfy the characteristics specification. (3) please consider that lcd backlight takes longer time to become stable of radiation characteristics in low temperature than in room tem perature. (4) a condensation might happen on the surface and inside of lcd module in case of sudden charge of ambient temperature. (5) please pay attention to displaying the sam e pattern for very long time. image might stick on lcd. if then, time going on can make lcd work well. (6) please obey the sam e caution descriptions as ones that need to pay attention to ordinary www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., cpt confidential 22 /22 CLAA170EA07q_y- studio -ver:1-20060314 electronic parts. 3 precautfonswithelectrostatics (1) this lcd module use cmos-ic on circuit board and tft-lcd panel, and so it is easy to be affected by electrostatics. please be careful with electrostatics by the way of your body connecting to the ground and so on. (2) please remove protection film very slowly on the surface of lcd module to prevent from electrostatics occurrence. 4 storage precautions (1) wh en you store lcds for a long time, it is recommended to keep the temperature between 0 ~40 without the exposure of sunlight and to keep the humidity less than 90%rh. (2) please do not leave the lcds in the environment of high humidity and high tem perature such as 60 90%rh. (3) please do not leave the lcds in the environment of low temperature; below -20 . 5 safety precautions (1) when you waste lcds, it is recommended to crush damaged or unnecessary lcds into pieces and wash them off with solvents such as acetone and ethanol, which should later be burned. (2) if any liquid leaks out of a damaged-glass cell and com es in contact with the hands, wash off throughly with soap and water. 6 others (1) a strong incident light into lcd panel might cause display characteristics' changing inferior because of polarizer film, color filter, and other materials becom ing inferior. please do not expose lcd module direct sunlight land strong uv rays. (2) please pay attention to a panel side of lc d module not to contact with other materials in preserving it alone. (3) for the. packaging box, please pay attention to the followings: (3.1) packaging box and inner case for lcd are designed to protect the lcds from the dam age or scratching during transportation. please do not open except picking lcds up from the box. (3.2) please do not pile them up m ore than 5 boxes. (they are not designed so.) and please do not turn over. (3.3) please handle packaging box with care not to give them sudden shock and vibrations. and also please do not throw them up. (3.4) packing box and inner case for lcds are made of cardboard. so please pay attention not to get them wet. (such like keeping them in high humidity or wet place can occur getting them wet.) www.yslcd.com.tw studio technology co.,ltd www.datasheet.net/ datasheet pdf - http://www..co.kr/

▲Up To Search▲

Price & Availability of CLAA170EA07

	To Download CLAA170EA07 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .